stainless steel sheet plate 310S，201，304，304L,321,316,316L,
| Thickness: | 0.5-100mm;or as required | Length | 2000-16000mm，or as required | ||||||||||
| Width: | 1220mm,1250mm,1500mm,2000mm,2200mm,2500mm, or as required | Technique | Hot Rolled Or Cold Rolle | ||||||||||
| ASTM | 201，304，304L,321,316,316L,310S | JIS | SUS201，SUS304，SUS304L,SUS321,SUS316,SUS316L,SUS310S | ||||||||||
| GB | 201，304，304L,321,316,316L,310S | Surface treatment | Polishing, sandblasting, wire drawing | ||||||||||
| Heat Treatment | Annealed; Quenched; Tempered | Standard: | ASTM，JIS，GB，DIN，EN | ||||||||||
Material:
300series: 301, 302, 303, 304, 304L, 309, 309s, 310, 310S, 316, 316L, 316Ti, 317L, 321, 347.
200series: 201, 202, 202cu, 204;
400series: 409, 409L, 410, 420, 430, 431, 440;
Others: 2205, 2507, 2906, 330, 660, 630, 631, 17-4ph, 17-7 ph, S31803904L, etc.
| Chemical Composition | ||||
| Grade | STS304 | STS 316 | STS430 | STS201 |
| length(10%) | Above 40 | 30MIN | Above 22 | 50-60 |
| Hardness | ≤200HV | ≤200HV | Below 200 | HRB100,HV 230 |
| Cr(%) | 18-20 | 16-18 | 16-18 | 16-18 |
| Ni(%) | 8.0-10.0 | 10.0-14.0 | ≤0.60% | 0.5-1.5 |
| C(%) | ≤0.08 | ≤0.07 | ≤0.12% | ≤0.15 |
Packing:
With Pe cover and packed and labeled according to the regulations and customer's requests. Great care is taken to avoid any damage which might otherwise be caused during storage or transportation.
| Grade | Finish | Thickness (mm) | Width (mm) | Length (mm) |
| 304 | 2B,No. 4 PE | 0.55 | 914, 1219 | 1828, 2438 |
| 304 | 2B, No. 4 PE | 0.70 | 914, 1219 | 1828, 2438 |
| 304 | 2B, 2B PE, No. 4 PE, BA PE | 0.90 | 914, 1219 | 1828, 2438 |
| 304 | 2B, 2B PE, No. 4 PE, BA PE | 1.20 | 914, 1219, 1500 | 1828, 2438, 3000, 3048, 3658 |
| 304 | 2B, 2B PE, No. 4 PE | 1.50 | 914, 1219, 1500 | 1828, 2438, 3000, 3048, 3658 |
| 304 | 2B, 2B PE, No. 4 PE | 1.60 | 914, 1219, 1500 | 1828, 2438, 3000, 3048, 3658 |
| 304 | 2B, 2B PE, No. 4 PE | 2.00 | 914, 1219, 1500 | 1828, 2438, 3000, 3048, 3658 |
| 304 | 2B, 2B PE, No. 4 PE | 2.50 | 914, 1219, 1500 | 1828, 2438, 3000, 3048, 3658 |
| 304 | 2B, 2B PE, No. 4 PE | 3.00 | 914, 1219, 1500 | 1828, 2438, 3000, 3048, 3658 |
| 304L | 2B, 2B PE | 4.00 | 1500, 2000 | 3000, 6000 |
| 316 | 2B | 0.55 | 1219 | 2438 |
| 316 | 2B | 0.70 | 1219 | 2438 |
| 316 | 2B | 0.90 | 1219 | 2438 |
| 316 | 2B,No. 4 PE | 1.20 | 1219 | 2438 |
| 316 | 2B,No. 4 PE | 1.50 | 1219, 1500 | 2438, 3000, 3658 |
| 316 | 2B,No. 4 PE | 1.60 | 1219, 1500 | 2438, 3000, 3658 |
| 316 | 2B,No. 4 PE | 2.00 | 1219, 1500 | 2438, 3000, 3658 |
| 316 | 2B,No. 4 PE | 2.50 | 1219, 1500 | 2438, 3000, 3658 |
| 316 | 2B,No. 4 PE | 3.00 | 1219, 1500 | 2438, 3000, 3658 |
| 316L | 2B, 2B PE | 4.00 | 1500, 2000 | 3000, 6000 |
| 430 | BA PE, No. 4 PE | 0.70 | 914, 1219 | 1828, 2438 |
| 430 | BA PE, No. 4 PE | 0.90 | 914, 1219 | 1828, 2438 |
| 3CR12 | 2B | 1.2 | 1250 | 2500 |
| 3CR12 | 2B | 1.6 | 1250 | 2500 |
| 3CR12 | 2B | 2.0 | 1250 | 2500 |
| AtlasCR12Ti | No. 1 | 3.0 | 1250, 1500 | 2500, 3000, 6000 |
| 3CR12 | No. 1 | 4.0 | 1250, 1500 | 2500, 3000, 6000 |
Other grades and widths
Grades: 301L, 310, 321, 2205, 253MA.
Widths (mm): 600, 750, 900, 1050, 1200, 1524.
Product outside the standard range can be indented from overseas mills or stocked by special arrangement.
Up to 15000mm length is available through the Atlas processing facilities.
other surface is available.
304 #4 Finish
304 #8 Mirror
304 2B Finish
304 BA Finish
316L #4 Finish
316L #8 Mirror
316L 2B Finish
430 #4 Finish
430 #8 Mirror
430 BA Finish
304 Diamond Plate
304 Plate
316L Plate
